48921 Wixom Tech Dr.
Wixom, MI USA 48393
Tel: 1-248-926-0088
Fax: 1-248-926-1003



STOCK NOS.  ET-4809 & ET-4810 

(2) Used Landis 3L CNC CBN Orbital Pin Chasing Crankpin Grinders 

Serial Nos.  928-10 & 928-11                                 Year: 1996 

Landis System 3200 Plus CNC Control System
Fanuc Series 90-30 PLC System
Nematron HMI Operators Interface Panel
Marposs E5N Gaging System
CBN Grinding Wheel
Center height from top of table:  9.50�
Standard grinding wheel diameter:  24.00�
Maximum Crankshaft Length: 32�
Maximum distance between standard fixture faces:  23.09�
Minimum distance between standard fixture faces:  9.31�
Left hand crank-head can slide 5.90� towards grinding wheel
Right hand crank-head can slide 7.87� towards grinding wheel
These distances are based on an 8.90� left hand crank fixture and
  8.50� right hand crank fixture
Machine is capable of grinding a 2.08� throw based on a crankpin
diameter of 1.97�

Location: Wixom, Michigan, USA

   Home | Used Machinery | Facility Liquidations | Crankshaft Machinery | Crankshaft Lines | About Us | Contact