Toyoda Model GL32M-63 Cylindrical CBN CNC Grinder
STOCK NO. ET-5311
Toyoda Model GL32M-63 Cylindrical CBN CNC Grinder
S/N: RF2802 New: 2008
Make: Toyoda
Model: GL32M-63
Toyoda GC 50 CNC Control
Swing over table: 320 mm
Distance between centers: 630 mm
Grinding diameter range: 10 – 150 mm
CBN Grinding Wheel: 350 mm dia. X 60 mm max width
Grinding wheel surface speed: 120 m/s
Wheelhead infeed slide: Vee and Flat
Wheelhead infeed slide feed system: Ballscrew
Wheelhead infeed slide rapid feed rate: 30 m/min on diameter
Wheelhead cross traverse feed system: Ballscrew
Wheelhead cross traverse rapid feed rate: 20 m/min
Workhead Type: LH & RH Live Workheads with Synchronized Drive and NC Quills
(LH = 85 mm stroke, RH = 80 mm stroke)
Workead max. revolution speed: 500 rpm
Workead center taper: MT #4
Footstock center taper: MT #4
Grinding wheel spindle motor: Belt Driven 15 kW
Grinding wheel dresser: None (see note 3 below)
Toyoda GC50 Control: Windows PC Based Control
Coolant Filtration System
Location: Wixom, MI, USA
Notes:
Due to the servo synchronized live workheads, between centers workpiece drive is possible with no chuck or work driver required.
Due to the workhead NC quills, various workpiece lengths and configurations are possible without changeover.
This machine is currently set-up as a Thrust Wall Grinder using electroplated CBN or diamond grinding wheel and is not equipped with a wheel dresser. A grinding wheel dresser can be added to this machine at extra cost.
